Acronyms & Abbreviations
|
Contracts - Forms & Schedules
|
Disclaimer
|
Estimating & Project
Management
Glossary
of Terms
|
Loss Recovery Guide with Standards
|
p1m-Links
|
p1mX-CAT IndexesSM
|
Supply Chain
|
Labor Unit Hours |
| Estimator Tools |
| Building Material Weights |
| Building Trades - Labor Unions |
| Decimal Equivalent - Fraction |
| - |
|
Labor Unit Hours: Doors - Finish Trim - Windows |
||
| Doors - Interior & Exterior | ||
|
Discipline |
Unit |
Hours Per Unit |
| Cylinder lock - keyed entry | Each |
0.65 - 0.85 |
| Cylinder - non-keyed | Each | 0.55 - 0.70 |
| Back band - door opening (one side) | Each | 0.75 - 0.80 |
| Back band - trimmed opening (one side) | Each | 0.95 - 1.25 |
| Door - frame, fit, hang and trim (exterior) | Each | 4.75 - 5.50 |
| Door - frame, fit, hang and trim (interior) | Each | 3.75 - 4.50 |
| Door - fit and hang - hardwood (interior) | Each | 1.45 - 1.75 |
| Door - fit and hang - softwood (interior) | Each | 1.90 - 2.35 |
| Door - pre-assembled - complete (interior) | Each | 1.35 - 1.55 |
| Door - pre-assembled - complete - multiple (interior) | Each | 0.95 - 1.25 |
| Garage overhead - complete (8x8x1-3/8) | Each | 5.90 - 6.75 |
| Garage overhead - complete (15x7x1-1/4) | Each | 7.90 - 8.75 |
| James / frames per-set (exterior / interior) | Each | 0.75 - 1.00 |
| Mortise lock set | Each | 2.25 - 2.50 |
| Screen door - fit and hang - complete | Each | 1.75 - 2.25 |
| Storm door - fit and hang - complete | Each | 1.75 - 2.25 |
| Stops and casing - hardwood (2-sides) | Each | 1.25 - 1.35 |
| Stops and casing - softwood (2-sides) | Each | 1.35 - 1.45 |
| Weather stripping (exterior) | Each | 1.75 - 2.25 |
| Finish Trim Top of Page | ||
|
Discipline |
Unit |
Hours Per Unit |
| Baseboard - hardwood (1 member) | 100 LF | 5.50 - 6.50 |
| Baseboard - softwood (1 member) | 100 LF | 4.50 - 5.25 |
| Baseboard - softwood (2 member) | 100 LF | 6.40 - 7.25 |
| Ceiling molding - softwood (1 member) | 100 LF | 5.50 - 7.00 |
| Chair rail - hardwood (1 member) | 100 LF | 5.25 - 6.00 |
| Chair rail - softwood (1 member) | 100 LF | 4.25 - 5.25 |
| Door / window casing - (up to 3-1/2) | 100 LF | 3.50 - 4.75 |
| Windows Top of Page | ||
|
Discipline |
Unit |
Hours Per Unit |
| Aluminum - double hung - fit and hang only | Each | 0.75 - 1.50 |
| Aluminum - double hung (complete) | Each | 2.00 - 2.30 |
| Aluminum - screen and storm sash (complete) | Each | 1.95 - 2.25 |
| Aluminum - sliding sash | Each | 1.95 - 2.25 |
| Back band | Each |
0.70 - 0.80 |
| Bow / bay window - fit and hang | Each |
1.75 - 3.10 |
| Casement sash - fit and hang (complete) | Each |
1.25 - 1.55 |
| Picture window - wood frame, trim and sash (thermopane) | Each |
1.30 - 4.00 |
| Vinyl window - double hung (complete) - (remove old window) | Each |
2.75 - 5.15 |
| Wood frame - assemble on-site | Each |
1.00 - 1.25 |
| Wood frame - install in frame construction | Each | 0.45 - 0.75 |
| Wood frame - install in masonry construction | Each | 1.00 - 1.25 |
| --- Double frame with mullion (add) | Each | 0.45 - 0.55 |
| Wood sash - fit and hang (complete) | Pair | 1.45 - 1.55 |
| Wood shutters - (hinged) | Pair | 2.95 - 3.25 |
| Wood shutters - (stationary) | Pair | 2.00 - 2.25 |
|
Labor hours listed above are based
on skilled labor, and will vary outside of the Hours Units
shown due to; surface conditions, job site conditions, temperature and humidity
levels, working height, quantity of materials, type - quality and condition of tooling,
lighting, etc. |
||
© Copyright 1998-2008 p1m.com