Acronyms & Abbreviations | Contracts - Forms & Schedules | Disclaimer | Estimating & Project Management

 Glossary of Terms | Loss Recovery Guide with Standards | p1m-Links | p1mX-CAT IndexesSM | Supply Chain

Labor Unit Hours
Ceiling - Gypsum - Plywood
Demolition
Doors - Trim - Windows
Flooring
Mold Remediation
Paint - Wallpaper
Rough Carpentry
Estimator Tools

Building Material Weights
Building Trades - Labor Unions

Decimal Equivalent - Fractions
Metric Converter
Minutes - Decimal Hours
Paint Coverage Chart
Roof Area Calculator
Roofing Estimator
Unit - Measurement
Wallpaper Characteristics
Wallpaper Coverage Chart
Wallpaper Federal Spec.
Wire Size Calculator
-
Labor Unit Hours:  Demolition                                      (labor unit hour do not include gathering and carting of debris)

Discipline

Unit

Hours Per Unit
Block - wall 100 SF 5.00 - 6.25
Cabinet - base 10 LF 1.55 - 3.25
Cabinet - wall 10 LF 2.00 - 4.45
Carpet - glued 100 SF 0.35 - 1.25
Cart debris to dumpster (includes gathering debris) 10 CY 3.95 - 8.95
Casing - baseboard - door/window trim (3-1/2) 100 LF 1.00 - 1.55
Ceiling suspension system - (2x4) 100 SF 1.50 - 2.25
Ceiling tile - lay in -  2x4 (no-insulation above) 100 SF 0.25 - 0.75
Ceiling tile -  (12x12) 100 SF 0.75 - 2.00
Concrete slab - 4" - no-rebar 100 SF 7.50 - 9.00
Counter top w/ back splash 10 LF 0.75 - 1.25
 
Door - entry - metal - 3-0 Each 0.55 - 0.75
Door - hollow-core - 3-0 Each 0.30 - 0.55
Door - overhead - (8x8x1-3/8) Each 1.95 - 3.95
Door - overhead - (15x7x1-1/4) Each 3.00 - 5.95
Door - wood - solid-core - 3-0 Each 0.60 - 1.10
Floor tile - ceramic - 12x12 100 SF 1.75 - 3.55
Floor - hardwood - 3/4" - 1" 100 SF 2.25 - 3.15
Floor tile - VCT - 12x12 100 SF 1.55 - 2.55
Floor - sub-floor - plywood 100 SF 1.20 - 2.25
Framing - metal studs only (3-5/8) - 16" O.C. - (non-load-bearing) 100 SF 0.20 - 0.55
Framing - wood studs only (2x4) - 16" O.C. - (non-load-bearing) 100 SF 0.35 - 0.65
Gutter - downspout 100 LF 3.30 - 4.25
Gypsum board - ceiling - (3/8 - 1/2) 100 SF 2.25 - 3.25
Gypsum board - wall - (3/8 - 1/2) 100 SF 1.65 - 2.20
Gypsum board - ceiling - 5/8 100 SF 2.75 - 4.25
Gypsum board - wall - 5/8 100 SF 1.85 - 2.55
 
Roof - built up - flat 100 SF 2.00 - 5.35
Roof - sheeting - 1/2" 100 SF 1.45 - 2.00
Roof - shingles  asphalt (25lb) 100 SF 1.00 - 1.55
Siding - aluminum 100 SF 1.55 - 2.25
Siding - wood 100 SF 1.15 - 2.25
Window - double-hung - (3x5) Each 0.50 - 1.00
Window - picture - (4x7) Each 1.25 - 2.25

Labor hours listed above are based on skilled labor, and will vary outside of the Hours Units shown due to; surface conditions, job site conditions, temperature and humidity levels, working height, quantity of materials, type - quality and condition of tooling, lighting, etc.

The p1m.com Disclaimer pertains to the Labor Unit Hours within this section and all Labor Unit Hour within p1m.com.

© Copyright 1998-2008 p1m.com