Acronyms &
Abbreviations
|
Contracts -
Forms & Schedules
|
Disclaimer
|
Estimating &
Project Management
Glossary of Terms
|
Loss Recovery Guide
with Standards |
p1m-Links
|
p1mX-CAT IndexesSM
|
Supply Chain
| Labor Unit Hours: Ceiling Systems - Gypsum Board - Plywood | ||
|
Discipline |
Unit |
Hours Per Unit |
| Ceiling tile (12x12) glued on flat surface | 100 SF | 2.00 - 4.00 |
| Ceiling tile (12x12) stapled on furring strips | 100 SF | 4.00 - 5.00 |
| Furring on ceiling joists 12" O.C. | 100 SF | 2.95 - 3.50 |
| Furring on stud wall - 12" O.C. | 100 SF | 2.00 - 2.55 |
| Ceiling tile (24x24) lay-in (medium grade) | 100 SF | 2.75 - 3.50 |
| Ceiling tile (24x48) lay-in (medium grade) | 100 SF | 2.75 - 3.50 |
| Ceiling suspension system (24x24) (medium grade) | 100 SF | 1.25 - 1.55 |
| Ceiling suspension system (24x48) (medium grade) | 100 SF | 1.00 - 1.35 |
| Fiberboard (Celotex, etc.) | 100 SF | 0.75 - 1.25 |
| Gypsum wallboard 3/8" on wood studs (ceiling) | 100 SF | 0.85 - 1.15 |
| Gypsum wallboard 3/8" on wood studs (wall) | 100 SF | 0.75 - 1.00 |
| Gypsum wallboard 1/2" on wood studs (ceiling) | 100 SF | 0.90 - 1.20 |
| Gypsum wallboard 1/2" on wood studs (wall) | 100 SF | 0.85 - 1.10 |
| Gypsum wallboard 5/8" on wood studs (ceiling) | 100 SF | 0.98 - 1.25 |
| Gypsum wallboard 5/8" on wood studs (wall) | 100 SF | 0.85 - 1.18 |
| Insulation above ceiling tile - (3-1/2 to 6) | 100 SF | 0.78 - 1.20 |
| Tape & finish gypsum wallboard | 100 SF | 1.95 - 3.55 |
| Plywood - 1/4" pre-finished (on stud wall) | 100 SF | 3.00 - 3.55 |
| Plywood - 3/8" CDX (on stud wall) | 100 SF | 1.00 - 1.20 |
| Plywood - 1/2" good one-side (on stud wall) | 100 SF | 5.75 - 8.25 |
|
Labor hours listed above are based
on skilled labor, and will vary outside of the Hours Units
shown due to; surface conditions, job site conditions, temperature and humidity
levels, working height, quantity of materials, type - quality and condition of tooling,
lighting, etc. |
||
© Copyright 1998-2008 p1m.com